Linux/Mac Networking Commands

I have been gathering a bunch of Linux/Mac Commands that I have found useful, hopefully someone else will find this list useful.

Run a speed test from CLI:

curl -s https://raw.githubusercontent.com/sivel/speedtestcli/master/speedtest.py | python -

Get an ip address for en0:

ipconfig getifaddr en0

Same thing, but setting and echoing a variable:

ip=`ipconfig getifaddr en0` ; echo $ip

View the subnet mask of en0:

ipconfig getoption en0 subnet_mask

View the dns server for en0:

ipconfig getoption en0 domain_name_server

Get information about how en0 got its dhcp on:

ipconfig getpacket en1

View some network info:

ifconfig en0

Set en0 to have an ip address of 10.10.10.10 and a subnet mask of 255.255.255.0:

ifconfig en0 inet 10.10.10.10 netmask 255.255.255.0

Show a list of locations on the computer:

networksetup -listlocations

Obtain the active location the system is using:

networksetup -getcurrentlocation

Create a network location called Work and populate it with information from the active network connection:

networksetup -createlocation Work populate

Delete a network location called Work:

networksetup -deletelocation Work

Switch the active location to a location called Work:

networksetup -switchlocation Work

Switch the active location to a location called Work, but also show the GUID of that location so we can make scripties with it laters:

scselect Work

List all of the network interfaces on the system:

networksetup -listallnetworkservices

Rename the network service called Ethernet to the word Wired:

networksetup -renamenetworkservice Ethernet Wired

Disable a network interface:

networksetup -setnetworkserviceenabled off

Change the order of your network services:

networksetup -ordernetworkservices “Wi-Fi” “USB Ethernet”

Set the interface called Wi-Fi to obtain it if it isn’t already

networksetup -setdhcp Wi-Fi

Renew dhcp leases:

ipconfig set en1 BOOTP && ipconfig set en1 DHCP

ifconfig en1 down && ifconfig en1 up

Renew a dhcp lease in a script:

echo "add State:/Network/Interface/en0/RefreshConfiguration temporary" | sudo scutil

Configure a manual static ip address:

networksetup -setmanual Wi-Fi 10.0.0.2 255.255.255.0 10.0.0.1

Configure the dns servers for a given network interface:

networksetup -setdnsservers Wi-Fi 10.0.0.2 10.0.0.3

Obtain the dns servers used on the Wi-Fi interface:

networksetup -getdnsservers Wi-Fi

Stop the application layer firewall:

launchctl unload /System/Library/LaunchAgents/com.apple.alf.useragent.plist
launchctl unload /System/Library/LaunchDaemons/com.apple.alf.agent.plist

Start the application layer firewall:

launchctl load /System/Library/LaunchDaemons/com.apple.alf.agent.plist
launchctl load /System/Library/LaunchAgents/com.apple.alf.useragent.plist

Allow an app to communicate outside the system through the application layer firewall:

socketfilterfw -t
“/Applications/FileMaker Pro/FileMaker Pro.app/Contents/MacOS/FileMaker Pro”

See the routing table of a Mac:

netstat -nr

Add a route so that traffic for 10.0.0.0/32 communicates over the 10.0.9.2 network interface:

route -n add 10.0.0.0/32 10.0.9.2

Log bonjour traffic at the packet level:

sudo killall -USR2 mDNSResponder

Stop Bonjour:

launchctl unload -w /System/Library/LaunchDaemons/com.apple.mDNSResponder.plist

Start Bojour:

launchctl load -w /System/Library/LaunchDaemons/com.apple.mDNSResponder.plist

Put a delay in your pings:

ping -i 5 192.168.210.1

Ping the hostname 5 times and then stop the ping:

ping -c 5 google.com

Flood ping the host:

ping -f localhost

Set the packet size during your ping:

ping -s 100 google.com

Customize the source IP during your ping:

ping -S 10.10.10.11 google.com

View disk performance:

iostat -d disk0

Get information about the airport connection on your system:

/System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Resources/airport -I

Scan the available Wireless networks:

/System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Resources/airport -s

Trace the path packets go through:

traceroute google.com

Trace the routes without looking up names:

traceroute -n google.com

Trace a route in debug mode:

traceroute -d google.com

View information on all sockets:

netstat -at

View network information for ipv6:

netstat -lt

View per protocol network statistics:

netstat -s

View the statistics for a specific network protocol:

netstat -p igmp

Show statistics for network interfaces:

netstat -i

View network information as it happens (requires ntop to be installed):

ntop

Scan port 80 of www.google.com

/System/Library/CoreServices/Applications/Network\ Utility.app/Contents/Resources/stroke www.google.com 80 80

Port scan krypted.com stealthily:

nmap -sS -O krypted.com/24

Establish a network connection with www.apple.com:

nc -v www.apple.com 80

Establish a network connection with gateway.push.apple.com over port 2195

/usr/bin/nc -v -w 15 gateway.push.apple.com 2195

Establish a network connection with feedback.push.apple.com only allowing ipv4

/usr/bin/nc -v -4 feedback.push.apple.com 2196

Setup a network listener on port 2196 for testing:

/usr/bin/nc -l 2196

Capture some packets:

tcpdump -nS

Capture all the packets:

tcpdump -nnvvXS

Capture the packets for a given port:

tcpdump -nnvvXs 548

Capture all the packets for a given port going to a given destination of 10.0.0.48:

tcpdump -nnvvXs 548 dst 10.0.0.48

Capture the packets as above but dump to a pcap file:

tcpdump -nnvvXs 548 dst 10.0.0.48 -w /tmp/myfile.pcap

Read tcpdump (cap) files and try to make them human readable:

tcpdump -qns 0 -A -r /var/tmp/capture.pcap

What binaries have what ports and in what states are those ports:

lsof -n -i4TCP

Make an alias for looking at what has a listener open, called ports:

alias ports='lsof -n -i4TCP | grep LISTEN'

Report back the name of the system:

hostname

Flush the dns cache:

dscacheutil -flushcache

Clear your arp cache:

arp -ad

View how the Server app interprets your network settings:

serveradmin settings network

Whitelist the ip address 10.10.10.2:

/Applications/Server.app/Contents/ServerRoot/usr/libexec/afctl -w 10.10.10.2